SAFE. RELIABLE. EFFECTIVE.
(Superior Protection, Perfect Angles)
BRENT Heat-Shrinkable Right Angle Boot is a specialized, pre-molded transition piece used to protect the critical junction where a cable meets a connector. Unlike standard straight heat shrink, these are molded into a permanent "L" shape, designed to transition wires at a sharp angle without putting physical stress on the cables and terminal lugs.
Space-Saving Design: The 90°circumference configuration allows for tight cable routing in cramped enclosures or behind panels.
Rugged Durability: Resistant to abrasion, mechanical impact, and most industrial solvents.
Strain Relief: Prevents cable fatigue and wire breakage at the connector interface.
Versatile Fit: High shrink ratios (3:1) ensure a snug fit over a wide range of connector sizes.
Dimensions
| CODE | H | T | ||
| AS SUPPLIED | AFTER RECOVERY | AS SUPPLIED | AFTER RECOVERY | |
| BRAB-1 | 75 | 35 | 36 | 18 |
| BRAB-2 | 75 | 35 | 50 | 26 |
| BRAB-2A | 95 | 35 | 67 | 26 |
Technical Specifications
| Property | Requirements | Test Method |
| Physical | ||
| Tensile strength | 12 N/mm2 (MPA)(Min.) | ASTM D638 |
| Ultimate Elongation | 350% (min) | ASTM D638 |
| Density | 1.15 ± 0.2 gm/cm3 | ASTM D792 |
| Hardness | 45 ± 10 Shore D | ASTM D2240 |
| Water absorption | 0.5 % (max) | ASTM D570 |
| Thermal | ||
| Accelerated ageing | (120°C for 500 hrs) | ASTM D2671 |
| Tensile Strength | 11 N/mm2 (Mpa) (min.) | ASTM D 638 |
| Ultimate Elongation | 300% (min) | ASTM D 638 |
| Low Temperature Flexibility (-40°C for 4 hrs) | No Cracking | ASTM D2671 |
| Heat Shock (250°C for 30 min) | No cracking or flowing | ESI 09-11 |
| Shrink Temperature | 125°C | IEC 216 |
| Continuous Temperature Limit | -40 to +100°C | IEC 216 |
| Electrical | ||
| Dielectric strength | 15 KV/mm (min.) | ASTM D149 |
| Volume Resistivity | 1 x 1014 Ohm.cm(min.) | ASTM D257 |
| Dielectric Constant | 5 (max.) | ASTM D150 |
| Resistant To Track & Erosion | No tracking, erosion or flame failure upto 3.25 KV for 20 min. | ASTM D2303 |
CORE Heatshrink Products Company
48, Tyagi Garden, Yamunanagar-135001, Haryana (India)
coreheatshrink@gmail.com
enquiry@coreheatshrink.com
+91-981-3213-489,
+91-972-9423-780
+91-989-6810-913
Please contact us if you need help to understand our products & services
enquiry@coreheatshrink.com
©2026 www.coreheatshrink.com. All rights reserved. Design, Develop and Maintained By The Get Enquiry.
